Bogen ZX3 Specifications download pdf (Page 12)

ZX3 Module Connections

ZX3 Module Paging Output Connections

There are three zone paging outputs on the ZX3 module. The paging

outputs are intended to connect to self-amplified speakers, but are also

compatible with amplifier inputs as well. The Tip (T) and Ring (R)

connections are transformer-isolated audio outputs for driving up to 150

self-amplified speaker inputs.

ZX3 AUX Contacts

Each zone on the ZX3 module has a C-form contact rated at 1A @ 30V

DC and 0.5A @ 125V AC. They change state when the corresponding

zone becomes active. The ZX3 AUX contacts are not programmable.

ZX3 Power Supply Output

A 24V DC, 1A regulated power supply, built into the UTI312, can be used

to supply power to self-amplified speakers through a 2-pin plug-in

connector on the ZX3 module. The + and - terminals provide 24V DC

for powering the self-amplified speakers. The UTI312 can supply a total

of 1A @ 24V DC through all of these connectors.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Bogen ZX3 Specifications Page 12